|
Milwaukee 48-20-5035 2-Inch Core Bit
|
MSRP: $156.80
Your Price: $86.84
Savings: $ 69.96 ( 45% )
Shipping: Usually ships in 24 hours
Manufacturer: Milwaukee
|
|
Milwaukee 48-20-5035 2-Inch Core Bit Features
|
2 in. diameter
Usable cutting depth 3 in.
Thin wall
Use with SDS core bit shank 48-03-3555 (8 in.) or 48-03-3561 (12 in.)
|
|
|
|
|
|
|
|
|
Additional Milwaukee 48-20-5035 2-Inch Core Bit Information
|
Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-3/8 inch. The inside core must be removed by the operator before deeper drilling can be accomplished. The Thick Wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 inch extension is available to allow for the deeper holes to be drilled. The appropriate (dependant on the diameter) SDS Plus Drive Shank must be used to drive the Core Bit. Use 48-20-6155 Center Pin and 48-20-61575 Guide Plate for positioning and starting the hole. Thin Wall Core Bits are available from 1 inch to 6 inch diameters. See Thick Wall Core Bits for cured concrete and/or larger hammers. FEATURES: 2 in. diameter. Usable cutting depth 3 in.. Thin wall. Use with SDS core bit shank 48-03-3555 (8 in.) or 48-03-3561 (12 in.)
|
|
|
What Customers Say About Milwaukee 48-20-5035 2-Inch Core Bit:
|
|
In few holes, we encountered 1/2" rebars and the core bit (carbide) cut them. I used this product to drill (10) through holes in 14"-thick concrete stem wall (we used the milwaukee extension bar and center piece). You do stop every ~3-in at a time to clear the concrete. It works perfect. no water needed. We used the small milwaukee 1" hammer drill to drive the core bit (remember you are only cutting a thin curf so you can core 2-1/2" dia using a 1" rated hammer drill). Hope this was helpful.
|
|
 |
|
|
